Rev. B 1112
54823 pg. 6
Supertop NX Twill Installation Instructions
Install Stay Pad
Do Not allow Stay Pad
to twist.
Align the two (2) holes in the square end of the
Stay Pad with the 2 holes in the corners of the #3
Bow. Install two (2) #8 x 1/2" Pan Head Washer
Screws. Pull the pointed end of the Stay Pad back
to the #4 Bow. Make sure that it is not twisted and
the point is to the inside. Install three (3) #8 x 1/2"
Pan Head Washer Screws. Repeat on both sides.
#8 x 1/2" Pan Head
Washer Screws
#8 x 1/2" Pan
Head Washer
Screws
#8 x 1/2" Pan Head
Washer Screws
Stay Pad
Stay Pad
#3 Bow
#3 Bow
#4 Bow
Place the Top Fabric Assembly on the back of the vehicle with the header on top.
Clip the #4 Bow pivot knuckle into the forward lower hole in the Bow Mount
Bracket. Clip the #3 Bow pivot knuckle into the top slot in the Bow Mount Bracket.
Secure Top Fabric Assembly to Bow Mount Bracket
#3 Bow
#4 Bow
Drape Top Fabric over Vehicle
Open the Top Assembly and drape it over the cab
of the vehicle.
