51361 4
Rev. A 1298
Rear Bow
If Studs are not
present - Use snaps as
guide to install Studs
Step Three
Optional
If the Studs are missing from the bow on your vehicle,
install the Body Studs included with your top. Center the
rear seam on the bow and use the snap flap as a guide
to mark the locations of the snaps. Center punch and
drill a 3/32 inch hole for each stud. Install the studs with a
#6 Sheet Metal Screw.
View from inside vehicle
Step Four
Optional
If the Tension Straps are missing from your vehicle,
install the straps included with your top. Center punch
and drill a 7/32 inch hole on each side of the tailgate,
above the existing bolt. Install each Tension Strap with
a #10-24 x 3/4" Truss Head Phillips Screw and a #10-24
Locknut. Install the Tension Strap with the hook and
loop fasteners facing the outside of the vehicle.
Tension Strap
Tailgate
Center punch and
drill 7/32" hole
Use a #10-24 x 3/4"
Truss Head Phillips
Screw and #10-24
Locknut
Overhead view of vehicle
rear corner
