background image

P1 - 29283 - Rev. D  1115

Installation Instructions - Seat Covers, Front Kit

© 2015 Bestop, Inc.

Installation Instructions

Seat Covers, Front Kit

Vehicle Application:

Wrangler 2DR, Wrangler Unlimited

2013-2017

Part Number 29283

Installation Tips

Read and follow, precisely, all installation instructions provided when 

installing this product. Failure to do so may result in a poor fit, and could 

place occupants of the vehicle in a potentially dangerous situation.

To reduce the risk of accidental injury: Follow all vehicle Manufacturer’s and Bestop® 

safety messages, application and installation instructions.

• Do not remove seats from the vehicle to install this product.
• Fit and maintain sides of seat cover as tight to seat as possible, always    

  matching front to side seam of seat with similar panels and seams of seat cover.
• Remove headrest carefully to avoid damaging manufacturer’s wiring. 

  Assure all plugs are connected after installation of seat cover.
• Do not use and replace if seat cover becomes damaged or wear no longer allows   

  tight fit to seat sides. 

Tools

Safety Glasses

Support

We’re here to help!

Go to www.Bestop.com and

click “Contact Us”

See a video showing
installation of this product at:

www.bestop.com/video

WARNING

Installation Time

Skill Level

2 Hours

3 - Moderately Difficult

Содержание 29283










Отзывы: