- 16 -
camera and the cinch plug to the video input of a TV set or the like. As soon as
the jack plug is connected to the TV-out socket , the built-in screen is
deactivated and the image is played back via the TV-out output .The operating
mode selector switch must be set to the SET position.
Transferring recordings to a computer
Connect the USB plug of the supplied USB cable to the USB port on the camera
and the USB plug to a free USB 2.0 port of a switched-on computer. This will not
recognise the device as "mass storage". When you have confirmed this message
of the camera with "OK", the camera connects to the computer and the content
of the SD/SDHC memory card will appear as a new drive on the computer. Now
carry out the required file operations.
Technical Parameters Setting
Category
Parameters
Image Sensor
12 Mega Pixels Color CMOS
Maximum Pixel
4000x3000
Lens Angle
120 degrees
Maximum sense
distance
65 feet/20 meters
LCD Screen
48x35mm(2.36")
Operation Keypad
6 Keypad
Storage Support
SD card (8MB ~32GB)
Image Size
12MP=4000x3000;
5MP = 2560x1920;
Video Size
1280x720p: 30fps; 720x480: 30fps;
640x480: 30fps; 320x240: 30fps
PIR sensitivity
High/Standard/Low
OperationMode
Day/Night
TriggerTime
The fastest reach 1 seconds(Using SD card below 2G)
Trigger interval
5 seconds-60 minutes adjustable
Video Length
1-30 seconds adjustable
Video
Take photo first then take video
Playback ZoomIn
1-8 times
Time Stamp
Optional,you can add the serial number of camera
Timer
On/Off; Programmable
Password setting
4-Digit Numbers
Camera number
Support the 4number composed by letters and numbers
freely
Time Lapse
On/Off; 1 Second ~ 24 Hours
