- 7 -
2.1 Installing the Battery
Install the battery on the camera, please follow the instructions below:
1) Unlock the two buckles, open the camera and keep the power button in OFF
position.
2) Open the battery box, install 8 AA batteries according to the direction of the
positive and negative mark, ensure polarity matching and ensure that battery
should be assembled in place.
Recommend you use high-performance alkaline AA batteries. You can also
connect an external power supply and battery; please sure that voltage
matches the camera. When connecting an external power supply or battery, the
camera will use the external power preferentially.
2.2 Installing the SD Card
The camera itself does not have the storage, so the camera will turn off
automatically if there is not SD card.
Attention: Please select brand SD card and use after formatted on a computer
and then use ordinary neutral card is not guaranteed to work.
Before inserting the SD card, please sure that the SD card write-protection
button is in “close” position (not “lock” position).
The camera maximum supports 32 GB SD card, please sure that the SD card
you choose is within this range.
CAUTION: ALWAYS SWITCH THE CAMERA TO OFF MODE BEFORE YOU INSTALL
OR REMOVE THE BATTERIES OR THE SD CARD.
2.3 Setup Mode
Switch to the SET position to enter the Test mode. In this mode you can take
pictures or video clips like a regular digital camera, or enter the Menu to set up
parameters. On the keypad there are six “shortcut”functional keys working as
below:
1) Press
the key to set the camera to shoot video clips.
2) Press
the key to set the camera to take still pictures.
3) Press
the SHOT key to manually trigger the shutter. A photo or video
