- 12 -
Disassembly and cleaning of drawers
Take out all the content including the partitions and sliding trays before removing the drawers.
Pull the drawers to the end, lift the outside of the drawers a bit upwards and then pull the drawers out.
You can wash the drawers, partitions and sliding trays by clean water. Dry them with soft cloth. Never use
hot water for cleaning, in case these parts crack and hurt people.
Door seal cleaning
Door seal is easy to be dirty, aged and damaged, which will cause the refrigerating effect decline, so please
keep it clean.
Use water to clean the door seal and dry it thoroughly.
Stop using the appliance
I
f you stop using the appliance for a long time, you’d better
unplug the appliance and clean the drawers. Leave
the drawer’s doors open
to avoid smell.
Note: If the plug has been taken out, you need to wait at least 5 minutes to put in the plug again. Do not stop
the appliance too often.
TRANSPORT OF THE APPLIANCE
1.
Switch off the appliance and take out the plug.
2.
Take out all the food.
3.
Use tape to fix the movable parts such as sliding trays and partitions.
4.
Close the drawer door and fix it with tape.
C
aution! Don’t put the appliance upside down at any circums
tance. During the transport, please keep an angle
no larger than 45 degree in order to avoid cooling system problem.
POWER FAILURE AND HANDLING
If there is power failure, the drawers will keep the inside temperature within 1-2 hours even in summer. In
this situation, do not put in more food, and try not to open the drawer’s door.
If you know the power failure in advance, you can put a water-tight container with ice into the drawer.
Note: Temperature in drawers goes up due to power failure or other reasons will affect the food quality.
TECHNICAL SPECIFICATIONS
Rated voltage:
230V~
Rated current:
0.7A
Rated frequency:
50Hz
Lamp power:
1.5W
Climate class:
0,1,2,3,4,6,8
Refrigerant:
R600a(22g)
Protection against electrical shock:
I
Insulation blowing gas:
Cyclopentane
Noise level
40 dB(A)
Max. transmitting power
-6 ~ 4dBm
Frequency range
2402 - 2480MHz
Climatic class 0,1,2,3,4,6 or 8 means that ambient temperature is 32
℃
± 2
℃
.
We, Emerio, declare under our sole responsibility that the product:
TBT-126289.3 / TBT-126289.4
is in
conformity with the essential requirements and other relevant requirements of the RED Directive
(2014/53/EU)
The complete CE declaration is available at the following address: www.emerio.eu
Содержание TBT-126289.3
Страница 1: ......
