bester PDE 50, Руководство оператора

Страница: 45 / 68

B-10
Installation and Operator Instructions
Read this entire section before installation or operation of the machine.
Location and Environment
This machine will operate in harsh environments. However, it is important that
simple preventative measures are followed to assure long life and reliable operation:
 Do not place or operate this machine on a surface with an incline greater
than 10° from horizontal.
 This machine must be located where there is free circulation of clean air
without restrictions for air movement to and from the air vents. Do not cover
the machine with paper, cloth or rags when switched on.
 Dirt and dust that can be drawn into the machine should be kept to a
minimum.

This machine has a protection rating of IP21. Keep it dry when possible.
 Locate the machine away from radio controlled machinery. Normal operation
may adversely affect the operation of nearby radio controlled machinery,
which may result in injury or equipment damage. Read the section on
electromagnetic compatibility in this manual.
 Do not operate in areas with an ambient temperature greater than 40°C.
Duty cycle
The duty cycle of a welding machine is the percentage of time in a 10 minute cycle
at which the welder can operate the machine at rated welding current.
Example: 60% duty cycle:
Welding for 6 minutes. Break for 4 minutes.
Excessive extension of the duty cycle will cause the thermal protection circuit to
activate. See “Technical Specifications”.
Input Supply Connection
Installation and mains outlet socket shall be made and protected according to
appropriate rules. Check the input voltage, phase, and frequency supplied to this
machine before turning it on. For more information about input supply refer to the
technical specification section of this manual and to the rating plate of the machine.
Verify the connection of grounding wires from the machine to the input source.