BESTEK BNX-H110, Руководство пользователя

Страница: 49 / 53

49
Configuring Bypass at “Bypass” mode at boot up
To set Bypass pair #1 at “bypass” mode, go to the folder
g3bp0
, and issue this command:
echo 1 > nextboot
To set Bypass pair #2 at “bypass” mode, go to the folder
g3bp1
, and issue this command:
echo 1 > nextboot
Reboot to see this change take effect. Both Bypass LEDs are turned to red, and as in the picture below, the
notebook is now connected to internet.
To reverse this back to “
PassThrough
” mode, simply use this command:
echo 0 > nextbook
at the
specific folder according to which Bypass pair is to be configured.
This will also turn the top Bypass LED back to green.