BESTEK BNX-A61B, Руководство пользователя

Страница: 37 / 45

37
Graphics Configuration
Primary Display [Auto]
Preset the primary boot device from [Auto] [iGPU] [PCIE] [PCI]
iGPU Memory [Auto]
Set the system memory size allocated to DVMT 5.0 used by iGPU from [Auto] [32M] [64M] [96M] [128M]
~ [448M] [480M] [512M] [1024M]
Render Standby [Enabled]
Enable Intel® Graphics Render Standby support to reduce the power consumption for iGPU while the
system is idle.
iGPU Multi-Monitor [Disabled]
Enable/Disable iGPU Multi-Monitor support for add-on graphics devices. The iGPU shared memory size
will be fixed at 64MB.
USB Configuration
Legacy USB Support [Enabled]
Enable/Disable the support for USB devices on legacy operating systems.
[Disabled] The USB devices can be used only for the BIOS setup program.
[Auto] Allows the system to detect the presence of USB devices at startup. If detected, the USB controller
legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled.
EHCI Hand-off [Disabled]
Enable/Disable the support for operating systems without an EHCI hand
‑
off feature.
SIO GPIO
GPIO 1~8 [Input]
Configure the digital signal of GPIO pins 1~8.
[Input] GPIO pin set as input pin
[Output High] GPIO pin set as output pin at Logic High
[Output Low] GPIO pin set as output pin at Logic Low