1
Read through instructions from beginning to end before
starting this Installation.
2
Clean boards surface thoroughly.
3
Accurately measure the surface area to be covered with a
tape measure.
4
Cut your New-Rite Surface (P-1) to exactly fit the
surface area using a utility knife.
5
Test fit the New-Rite Surface.
#214 New-Rite Installation
Recommended Tools
Measuring Tape
Carpenter’s Square
Utility Knife
Roller
P1
New-Rite Surface 1 Roll
Parts List
NewRite_install 11/30/09
Use the Sponge (P-2) dipped in a
Mixture of Water and Alcohol to
clean the surface being covered and
to aid in positioning and moving the
New-Rite Surface. This mixture will
dry without effecting the bond.
R
EAD
T
HROUGH
I
NSTRUCTIONS
FROM
BEGINNING
TO
END
BEFORE
STARTING
THIS
INSTALLATION
.
N
OTE
:T
HIS
INSTALLATION
REQUIRES
TWO
P
EOPLE
.
Start on the left hand side of the board.
Start peeling the protective backer to
expose the adhesive back.
P2
Sponge
1 EA
P3
Squeegee
1 EA
P-2
P-1
