4
4. Insert the plastic Paper Holders back into the bottom groove in the Track (P-1). Slide the Tack
Strip insert back into the top recess in the Track. Replace the right End Cap and secure in place
with the Securing Screw you removed in Step #2. .
B
3A. For Masonry Walls:
A
1/4” Dia. Predrill
Follow Step 3 and drill through the Track (P-1) and into the masonry wall with a 1/8” diameter
drill on 16” centers and about 6” from each end. Remove the Track and drill a 1/4” diameter
hole into each 1/8” hole in the wall. Install Masonry Anchors (B) into the 1/4” diameter holes.
Illustration # 3A
Illustration # 4
End Cap
P-1
Securing
Screw
6”