4
Illustration # 4
Illustration # 5
P-2
C
P-4
D
P-1
D
P-5
D
6.
5. Assemble Marker Board (P-5) by insert-
ing 5/8” Socket Screw (C) through the
Marker Board (P-5) and through the
Board Tray (P-4). Insert board and tray
through the Leg (P-1). Use the Screw
Post (D) from the back of the Leg ((P-1)
and tighten by using Allen Wrenches
(H). See illustrations # 4.
P-6
P-2
D
P-4
C
C
7. Place the Top Shelf (P-7) by simply turning the
shelf and sliding through the legs. Top Shelf (P-
7) should rest over the Side Hinges (P-3). To
place the Flip Chart Hooks (P-8) simply set the
hooks over the top of the Leg (P-1) tube. See
illustrations # 6.
Tighten all frame Screws and Nuts with Allen
Wrenches and Cresent Wrench before using.
Assemble Marker Board (P-6) by inserting 5/8”
Socket Screw (C) through the Marker Board (P-
6), and Board Tray (P-4). Insert board and tray
through the Leg (P-2). Use the Screw Post (D)
from the back of the leg and tighten with Allen
Wrenches (H). See illustrations # 5.
P-7
P-3
P-8
Illustration # 6
P-1
786_12-10-14
8.
