Diagram:
•
Note: Use Nespresso original or compatible capsules ONLY
•
Default dispense volume:
o
Small cup: 1.35 fl. oz.
o
Large cup: 2.7 fl. oz.
1. Capsule holder lid
2. Capsule holder
3. Small cup
4. Power
5. Large cup
6. Drink dispenser
7. Capsule tray
8. Cup holder
9. Drip tray
10. Water tank lid
11. Water tank
Before first use:
1. Remove all packaging. Inspect machine to make sure it is in good working condition.
2. Clean all detachable parts with warm water. Wipe down machine with a damp cloth.
3. Place appliance on a stable and level surface.
a. Surface must be heat resistant and have adequate ventilation.
b. Do not place near any liquids such as a sink or water basin.
4. Fill water tank with cold, clean water. Water level must be between the MIN and MAX
level marks.
5. Plug machine into a wall outlet and press power button.
6. Place a cup on the cup holder and press the large cup button to run water through the
machine. Discard the dispensed water.
Operating Instructions:
1. Lift the capsule holder lid and insert your desired drink capsule. Close the lid.
a. Use Nespresso original or compatible capsules only.
2. Press power button. The small/large cup buttons will flash to indicate water heating.
3. Place a cup on the cup holder. Once the small/large cup buttons stay illuminated,
press your desired drink size.
4. Your drink will dispense into the cup. Open the capsule holder lid and the used
capsule will automatically drop into the capsule tray.
a. To pause during brewing process, press your selected drink button. Press
again to resume process.
Emptying Capsule Tray
1. Lift up and remove the cup holder/drip tray.
2. Pull the capsule tray out.
