PRODUCT ASSEMBLY
3
Confirm that the rods
are arranged correctly
and the players on the
same team face the
same direction.
NOTE:
The figures and
table are upside down in
this diagram.
|
5
Place a part C side panel with the ball entry hole closer to the floor.
Slide four part A home player rods with eight part 1 rubber spacers and eight part 2 plastic
washers into the designated holes.
1
Slide four part B away player rods with eight part 1
rubber spacers and eight part 2 plastic washers into the
designated holes.
2
C
x8
x4
A
1
1
x8
2
x8
1
x8
x4
B
Make sure that the ends with a hole are
arranged on the same side.
