9
Small Tilt Mount for Most TVs up to 50”
www.bestbuy.com/bestbuyessentials
• Place the adapter washer over the adapter bolt, then screw on the adapter nut and
tighten with a 4 x 4 Allen wrench.
Option 1: Installing the TV plate to TVs with a flat back
1
Align the TV plate with the screw holes on the back of the TV. Make sure that the
plate is level.
2
Place washers over the holes in the TV plate. Insert screws through the washers and
TV plate.
3
Tighten the screws until they are snug against the TV plate. Do not over tighten.
Note:
The washer (
I
or
J
) size depends on the size of the screws used. Use the
I
washer
with screw
B
. Use the
J
washer with screw
D
or screw
F
.
4 x 4 Allen wrench
Adapter
Flat back TV
TV Plate
With screw
B
With screws
D
or
F