3.
Using 1-1/2" hanger nails, install the right hangers to the 2x6 tie plate.
The top hanger flange should line up with the 'X' mark.
Wood Gusset
2x6 Tie Plate
Inside of Building
Rear Gable
Step 12 Layout for Truss Spacing
1.
Layout the truss spacing on the left sidewall, facing building. Start at the back of the building.
Measure from the inside face of the wood gusset when marking the location of the first truss.
2.
Locate the truss hangers, there are left and right hangers. Select the right hangers.
24"
20-3/8"
Long Side Nailed
to Wall Plates
Important: When marking the opposite wall, use the left hangers
and place the 'X' mark on the same side of the line so your trusses
are parallel when they are installed.
