Pre-Cut
Wall Studs
X
X
X
X
X
X
C
C
:
:
:
:
:
:
X
X
Stud Spacing
The length of pre-cut studs will vary from 92-1/4" to 93"
depending on you locality.
Step 1
Assemble Sidewalls
1.
Cut (2) two 2x4-10' boards to a length of 116-1/2". Position the boards together and indicate
with 'X' marks where the wall studs will be located.
2.
Mark a 'C' anywhere left of first stud mark. This is referenced in a later step.
3.
Install (6) six pre-cut wall studs between the top & bottom plates with (2) two 10d sinkers on
each end.
116-1/2" Wall Plate
24"
19-3/4"
116-1/2"
Wall Plates
24"
3.
Repeat to assemble (3) three more 116-1/2" long wall frames.
4.
Set frames aside.
Step 2
Assemble Door Header
75" Long 2x8
48" OSB Filler
Cut OSB to fit
1.
Locate (2) two 2x8-8' boards. Cut these boards
to a length of 75".
2.
Assemble the door header using 2x8 boards
and (2) two 7-1/4" x 48" OSB filler included
in our kit. Apply wood glue to both sides of
OSB and install (1) one filler to one end. Cut
to fit second OSB filler. Nail together with (12)
twelve 10d sinkers spaced evenly on each side.
Top Wall Plate
Bottom Plate
Do not discard any material until construction is complete, including short 2x4 blocks.
