1x4 Trim
2x3-47" Board
2x3-42-1/4" Board
Extends Below Siding
Step 3
Install Rear Gable Overhang & Trim
Install Ends With Blue
Mark At Ridge
1.
Apply 47" long 2x3 boards to the gable. These boards have a blue marking on one end. Install
this end at the peak. Install boards flush with the top of the gable frame. Use 10d sinkers.
2.
Install a 42-1/4" long 2x3 at the sides of the gable, flush with the frame. Board will extend
below siding.
3.
Apply 1x4 white pine trim to gable. Install a 47" long 1x4 at the top of the gable. These boards
have a blue marking on one end. Install this end at the peak. Install the 1x4 gable trim extending
1/2" above the siding on the gable. When installed later, the roof sheathing will be flush with
the top of the trim.
4.
Install a 42-1/4" long 1x4 at the sides of the gable.
