flush
1.
Install a gable on the rear wall. The gable
siding will extend over the 1x4 trim on the
lower wall. NOT behind the trim!
Secure gable to wall by nailing through the
gable plate with 10d sinkers. Nail siding along
the 1x4 trim board with 8d galv. nails.
3.
Install trim on the front wall of the building.
Step 10 Install Rear Gable
Step 9
Install Trim on Front & Back Wall Panels
Important: Bottom edge of siding extends
over 1x4 trim. Paint this edge.
Side
Wall
1x4 Trim
1x4 - 75 3/4" Corner Trim
1.
Install 1x4-75 3/4" corner trim boards to the back wall, see Step 8.
Install trim flush with the 2x4 top plate and flush with the siding on
the sidewalls. Use 8d galv. nails, spaced 12" apart.
2.
Cut 1x4-6' trim boards and install between the corner trim boards.
Install Trim Flush
with Top Plate
Back Wall
Panel
2.
Install gable on the front wall.
