If you are constructing a 12' x 12' building, go to Step 7.
4.
Install a full width siding panel but do not nail along the long edge that overlaps
the 12' wall frame. You can nail this edge after the wall panels are installed. This
will enable you to separate the wall panels making them easier to handle.
1.
Install (3) three 2x4-72" wall studs between
(2) two 48" long 2x4s boards. Install the stud
in the center of the wall frame.
2.
Repeat to assemble another 4' wall section.
5.
Repeat to apply siding to the other 4' wall frame.
2x4-4' Bottom
Plate
Do Not Nail Along This Edge
Step 6
Assemble Sidewalls for 16' Building Length
3.
Select one of the 12' sidewalls assembled in Step 5. Butt the 48" wall frame against the
wall with siding. DO NOT nail these frames together so they can be separated later.
12' Wall Panel from Step 5
4' Wall Panel
