BEST ACCESS SYSTEMS AD432, Руководство по обслуживанию

Страница: 43 / 54

Service and Maintenance
Key Combinator Service Manual 3–27
P
REVENTATIVE MAINTENANCE
Preventative maintenance is vital for keeping your key combinator
functioning properly. To ensure accurate keycuts and avoid possible
malfunctions, periodically perform the tasks below. It is also a good
idea to keep your key combinator covered whenever it is not in use.
Doing so will help keep dust and other foreign particles out of the
crevices of the combinator.
To help maintain your key combinator, perform the following tasks:
■
Clean (wipe down) the following items:
▲ chip chute to remove metal chips
▲
outside of key combinator to remove dust and other particles
▲
key carriage compartment to remove dust and
metal chips (
page 3–27 )
▲
punch and die compartment to remove dust and
metal chips (
page 3–27 ).
■
Check for and tighten any loose screws.
■
Adjust the key clamp spring as needed ( page 3–25 ).
■
Calibrate for consistency ( page 3–16 ).
■
Lubricate necessary parts ( page 3–28 ).
See the
BEST Key Combinator Preventative Maintenance Record
Sheet
in Appendix B of this manual to help you keep records of your
maintenance tasks.
C
LEANING PARTS
Cleaning the
punch and die
To clean the punch and die:
1. Remove the depth selector ( page 3–7 ).
2. Remove the punch and die assembly ( page 3–9 ).
3. Wipe out any key chips and dust from the compartment. Do not
lubricate this area.
4. Lubricate both sides of the die ( page 3–28 ).
5. Reinstall the punch and die assembly ( page 3–10 ).
6. Reinstall the depth selector ( page 3–8 ).
Cleaning the
key carriage To clean the key carriage:
1. Remove the key carriage ( page 3–11 ).
2. Wipe out any chips and dust from the compartment.
3. Lubricate both sides of the carriage ( page 3–28 ).
4. Reinstall the key carriage ( page 3–11 ).