Besantek BST-LX2, Инструкция по эксплуатации

Страница: 12 / 12

-10-
6. Replacement of Battery
When the battery voltage drops below the operating
voltage, a " " symbol will appear on the LCD
display. In this case, replace a new battery
immediately.
7. Precautions on Handling
Operating carefully, and do not drop the meter or hit
it with a hard object. Avoid using the meter in a dirty,
dusty ,or salt-air area or where there are corrosive
gases. If dirt or dust adhered to the surface of
detecting light, will decrease accuracy of the
measuring value. To clean the surface by wiping
with a soft and dry cloth.
8. Cleaning and Storage
WARNING
To avoid electrical shock or damage to the meter,
do not get water inside the case.
Periodically wipe the case with a damp cloth and
Detergent. Do not use abrasives or solvents.
If the meter is not used for over 60 days, remove the
battery for storage.
Due to our policy of constant improvement and development, we
reserve the right to change specifications without notice.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com