(D) Measurement time setting (Test Timer) - Function 2
1. Switch® the function rotary switch to turn on power and
no meter which function selected (Main page)
2. Press
®
SELECT button to enter the minor function
selection.
3. Press
(J)
(value-add) "up" or® (value-reduce) "down" to
find the measurement time setting, LCD display the
following pictures respectively:
Funct.ion Select.
2.Test. TiMer
4. Press
®
(ENTER/SAVE), LCD displays the picture
shown in below:
Test. TiMer
10 Minut.es
5. Press
(J)
(value-add) "up" or® (value-reduce) "down"
to set the test Time (form 1 to 30 minutes).
6. After setting is complete, press
®
(ENTER/SAVE) to
confirm & save the data measured.
&
Note: if Test Timer unit needs not to be adjusted, press
@) (ESC) to skip it and return back to the minor function
selection.
7. Press@) (ESC) again to return back to the main page.
-11-
