8
9
6-
7-
Slide the lower part of the shoulder belt guide open and
position the belt in the guide. Make sure the belt is not twisted
and close the guide again (8).
Always close the car three point belt into
the buckle before driving, also when the
seat is not in use by a child! (9)
(8)
(7)
(9)
Placing the stability strap
• In order to install the stability strap,
put the iZi Up and the headrest of the
car in the most upward position.
• Guide the stability strap between the
cover and the surface of the iZi Up
head rest.
• Then guide the strap around both
bars of the head rest of the car.
• Adjust the iZi Up to the correct height
by turning the height adjusting lever.
• Tighten the stability strap by
connecting the velcro strap as tight
as possible (7).
Removing the seat
1-
2-
3-
4-
5-
Slide the lower part of the shoulder belt guide open and
remove the belt from the guide (10).
Pull the FIX adjustment
handle out (11).
Release the FIX connectors by
pressing the FIX release buttons
on the FIX connectors (12).
Push the FIX connectors right
inside the base (13).
Remove the ISOfix insertion clips
from the vehicle seat.
(10)
(11)
(13)
(12)
9
