background image

2

 

 

 

!

Vital information

Vital information 

 

 

 

2

Preparing to install   

 

 

4

Before installation 

 

 

 

6

Installation in the car  

 

 

8

Waring: potential misuse 

 

 

11

Sitting positions 

 

 

 

12

Car seat protection   

 

 

12

Removing the iZi Kid ISOfix 

 

 

13

After an accident 

 

 

 

15

Guarantee 

 

 

 

15

Removing and refitting the cover 

 

16

Important advice 

 

 

 

18

Point of sale information 

 

 

20

Thank you for choosing Besafe iZi Kid ISOfix.

Contents

iZi Kid ISOfix can only be installed rearward facing. The car must be equipped  

 

-

  with ISOfix anchorage points.

 

iZi Kid ISOfix is not allowed to mount in front passenger seat with an activated  

 

-

  airbag.

The floor support must always be used. 

 

 

-

The harness must always be used when the child is in the seat. 

 

 

-

For children under 1 year and/or under 10 kg weight, we recommend that the  

 

-

  most reclined sitting position is used.

 

 

 

 

We recommend that this seat is used only for children who can sit upright, so not  

 

-

  younger than 6 months.

It is important that you read this user manual BEFORE 
installing your iZi Kid ISOfix. Incorrect installation could 
endanger your child.

!

Содержание iZi Kid ISOfix





















Отзывы: