2
Fitting of supplied anchor belts
Alternative A
1. Release the fixing bolts on the car seat’s two forward or rear fixing points.
2
. The attachment fittings have to go underneath the slide rail on the car seat
chassis. Insert an attachment fitting on either side of the car seat's two forward
fixing points, see fig. 1b, and tighten hard. 1a. In certain cars, the attachment
fittings will have to be mounted diagonally or at right angles to the car seat slide
rails. See fig. 1a
3. Thread the belt loop on one anchor belt through the opening in one of the two
attachment fittings. Then bring the anchor belt locking device through the belt loop
and pull hard. See fig. 1a
4. Do the same on the opposite side, see fig. 1c
Fig. 1a
Fig. 1b
Fig. 1c
If the distance between the child seat and the attachment fittings is so
short that it is hard to tighten the anchor belts sufficiently, the fittings can
be moved to the rear/forward fixing points and the anchor belts attached
to these instead.
Alternative B
Secure the two anchor belts round
the car seat's legs/slide rails
1.
Secure an anchor belt round each of
the car seat’s rear or front legs by
bringing the locking device of the
anchor belt through the belt loop.
Pull tight. See fig. 2
2.
Cross the anchor belts under the
car seat and lock, click.
Fig. 2
R e
arw
ard
-fa
cin
g
fitti
ng
of
an
ch
or
be
lts
.
