BES MDU12i, Модульный блок

Страница: 38 / 41

DOC32 Page 38 of 41 Issue 2 30 NOV 17
Telnet server commands
The Telnet server supports a number of commands that allow the slave iMDU to be
selected, outlets read and set and metering/environmental measurements to be read.
Read outlet command
The Read outlet command allows the status of an outlet to be returned, the format being:
read outlet xx
Where xx is the outlet number 01-12, replies with:
Outlet xx: ddd
Where ddd is ON if the outlet is on, OFF if the outlet is off or FUSE BLOWN if the outlets
fuse has opened.
Set outlet command
The Set outlet command allows an outlet to be switched on/off instantly or with a delay and
be cycled off/on with a delay, the format being:
set outlet xx dddd
Where xx is the outlet number 01-12 and dddd is as follows:
on instant
Turns the outlet on instantly.
off instant
Turns the outlet off instantly.
on delay
Turns the outlet on after the delay period setup on the configuration page for that particular
outlet.
off delay
Turns the outlet off after the delay period setup on the configuration page for that particular
outlet.
Cycle
Turns the outlet off and then on again using the delay setup on the configuration page for
that particular outlet.
Read meter voltage command
The Read meter voltage command returns the current voltage measured by the meter, the
format being:
read volts
Replies with:
Meter volts: vvv.vVAC
Where vvv.v is the current AC voltage.