Bes Ingenium IPR-K BD930000, Руководство по программированию, Страница: 5 / 17

BD930000
- IPR-K
Programming manual
v1.0
www.besknx.com
5
3 LED status
- Ethernet line LED: shows the status of the IP line. If it is off, there is an error or the line is not connected; if it is lit
green, the connection is correct; If, on the other hand, it is lit orange, the device is operating in manual mode or
the factory settings are being restored.
-
KNX line LED: shows the status of the KNX TP line. If the LED is off, there is an error, the line has no power, or is
disconnected. If the LED is lit green, the line connection is correct; if it is lit red, a factory reset is in progress;
while, if it is flashing green, the device is updating its firmware.
- Ethernet line traffic LED: if it is flashing green, there is traffic on the IP line; if it is off, there is no traffic; If the LED is
lit red, there are transmission errors on the line.
- KNX line traffic LED: if it is flashing green, there is traffic on the TP line; if it is off, there is no traffic; If the LED is lit
red, there are transmission errors on the line.
-
Group addresses LED (GA): if it is off, there is a different configuration on the Ethernet line and on the TP line; if it
is green, the device is filtering telegrams; if the LED is orange, no group address is filtered; while, if it is red, all
group addresses are blocked.
- Physical addresses (PA) LEDs: if it is off, there is a different configuration on the Ethernet line and on the TP line;
if it is green, the device is filtering telegrams; if the LED is orange, no physical address is filtered; while, if it is red,
all physical addresses are blocked.