7
6
Setting instructions:
Models with date
If packaging clip is on the crown (setting knob), please remove.
Note: Crown may already be in the out position or unscrewed.
Step 1:
Turn crown counter clock-wise to unscrew crown (fig. 1).
The crown is completely unscrewed when it turns freely.
Step 2:
Gently and carefully pull crown halfway out, you will feel a “click”, there
will be a bit of feel here (fig. 2).
Step 3:
Turn crown either clock-wise or counter clock-wise (depending on the
model) to advance the date, continue to advance the date to
yesterday’s date (fig. 3).
Step 4:
Carefully pull the crown out a bit further for a second “click”. Turn the
crown clock-wise to cycle the time past midnight, you will see the date
advance to today’s date. Continue to advance to set the desired time,
this will ensure the AM/PM is correct (fig. 4).
Step 5:
Push crown in to re-start second hand (fig. 5).
Step 6:
Push in and turn crown clock-wise to engage threads. Continue to turn
clockwise to firmly screw/rethread down crown. Do not overtighten
(fig. 5).
Note: Please screw/rethread down crown (setting knob) to ensure
water resistance and maintain warranty. Do not overtighten.
Date will need to be reset for months not ending with 31 days.
1
2
3
4
6
5
