Bertec Vision Advantage, Быстрый старт

Страница: 9 / 20

Bertec Vision Advantage
®
Quick Start Guide 03
1. Turn on the computer and make sure it is not in standby/hibernation mode.
2. Plug the Receiver into the computer using the provided USB cord and make
sure the LED light on the receiver is on.
3. Turn on the Head Tracker by sliding the switch on the side towards the LED.
You may need to use a small thin object to flip the switch.
4. Run Bertec Balance Advantage from the shortcut on the desktop. To log in,
select an operator name, type in the password, and select Login.
5. Verify that the Head Tracker is detected by the software:
> The LED indicator on the Head Tracker should be blinking rapidly.
> The Battery Level in the top right of the screen should be visible.
6. Place the Head Tracker in the headband with the LED on top and facing out.
7. Put the headband on the patient’s head with the Head Tracker centered on the forehead.
Note: The minimum recommended battery level for testing is 25%.
Connecting Devices and Starting the Software