6
Installation
To install the cooktop, cut out a rectangular in the counter as shown on the drawing and table below. Also,
ensure that you have a minimum of 10 mm (3/8”) of space in the back of the unit, between the rim and
backsplash on your counter (or wall if no backsplash) for ventilation.
A self-adhesive gasket is supplied with your unit. Before setting the cooktop in place install this gasket by
sticking it underneath the rim.
Apply the gasket only along the front rim and on both sides. Do not put this gasket on the rim in the back.
This gasket will prevent most of the spills from entering the cabinet below and will keep the unit in place.
Once the gasket is installed, place the cooktop in the opening, and lay it on the rim. Do this carefully - do not
drop the unit into the cut-out. Make sure that the unit. is sitting properly on its rim all around the perimeter.
If your counter is produced from porous materials which tend to swell if in contact with humidity
and water, to better protect the cut-out, use proper sealants on the edge which would prevent any
penetration of humidity and water.
Chamfer all exposed edges of decorative laminates to prevent further chipping.
Radius corners of the cut-out and file them to ensure smooth edges and prevent
corner cracking.
Rough edges and inside corners which are not rounded as well as forced fits can contribute to
cracking of counter top laminate.
P304IX P365IX
COOKTOP AND CUT-
OUT SIZES
Width Depth Thickness
Cut-out size P304IX
750mm(29 ½”)
496mm(19 ½”)
142mm(5 5/8”)*
Cut-out size P365IX
900mm(35 7/16”)
496mm(19 ½”)
160mm(6 1/4”)*
Cut-out size P304IX
743mm(29 ¼”)
488mm(19 7/32”)
92mm(3 5/8”)
Cut-out size P365IX
893mm(35 5/32”)
488mm(19 7/32”)
110mm(4 5/16”)
Cut-out size P304IX
790mm(31 1/8”)
518mm(20 3/8”)
10mm(25/64”)
Cut-out size P365IX
938mm(36 15/16”)
518mm(20 3/8”)
10mm(25/64”)
*This dimension includes clearance underneath the unit of 50 mm [2"]
