CARE AND CLEANING
Grease filters
CLEANING METAL CASSETTE GREASÉ. FILTERS
• Tue filters must be cleaned every 2 months, or more fte
quently in case of particularly heavy use of the hood. Fil
ters can be washed in a dishwasher.
• Pull out the sliding suction pane!.
Remove the filters one by one, after having disconnected
the relative fastening elements.
• Wash the filters, taking care not to bend them. Let them get
dry before refitting thèm. (The colour of the filter surface
may change throughout the time but this has no influence
to the filter efficiency ).
• When refitting the filters, make sure that the handle is visi
ble on the outside.
Close the sliding suction pane!.
Charcoal filter (Recycling version)
REPLACING CHARCOAL FILTERS
Warning: Turn the lights off and wait unti! the lamps cool
down before you change the odour filter.
• Toese filters are not washable and cannot be regenerated,
and must be replaced approximately every four months or
more frequently by particularly heavy use.
• Pull out the sliding suction pane!.
• Remove the grease filters.
• Remove the saturated carbon filter by releasing the fIXing
hooks
• Fit the new filter by hooking it into its seating.
• Replace the grease filters.
• Close the sliding suction pane!.
ffll
,,.,
WORKTOP ILLUMINATION
If a larnp fails to function at any time, open the metal grille pane!
and check that the larnp is fully screwed into the holder.
When changing the larnp, an identica! replacement must be fitted
to ensure a safe working ofthe hood.
bmp
PowerlW)
Socket
VollaoeM
Dlmension (mm)
ILCOSCode
�
4
E14
220-240
107 X 37
DRBB/F-4-220-240-l:14-351100
'i'
5
GU10
230
52x50
DRPAR-51840-220/240-0U10-35/36
DRPAR-51830-220/240.GU10-35/36
ffll
ili
