Filling The Rinse Aid Reservoir
3
Close the cap after all.
1
2
Remove the rinse reservoir cap by
lifting up the handle .
Pour the rinse aid into the dispenser,
being careful not to overfill.
12
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is
designed to adjust the consumption by user. Follow the below steps.
1.
.
2.
Within 60 seconds after step 1, press the Program button “
>
”more than 5 seconds,
and then press the Delay button “+” to enter the set model, the rinse aid indication
blinks as 1Hz frequency.
3.
Press the Program button “>” to select the proper set according to your using habits,
the sets will change in the following sequence: d3->d4->d5->d1->d2->d3.
The higher the number, the more rinse aid the dishwasher uses.
4.
Without operation in 5 seconds or press the Power button to complete the setup
and exit the setup mode.
Open the door and switch on the appliance
Содержание DW6083PRT
Страница 53: ......