DO NOT DISCARD THESE WARNINGS AND INSTRUCTIONS
200 Old Wilson Bridge Road
Columbus, OH USA 43085
(866) 928-2657
worthingtoncylinders.com | bernzomatic.com
06/24/15
ADDITIONAL WARNINGS
1. Make sure the torch is cool before installing or removing cylinder and accessories.
2. Check all joints and couplings periodically to insure against loose connections. With valve open, without lighting, test
all connections with soapy water. If bubbles appear, gas is leaking and torch must be repaired or replaced. Never Use a
flame to check for leaks. Make this test in a well ventilated and spark-free area and where there are no open flames.
3. In cold weather the size of the flame will be smaller. To produce a larger flame, pre-warm the cylinder to room
temperature prior to use.
STORAGE
REMOVE CYLINDER FROM TORCH WHEN NOT IN USE
1. Turn torch regulator valve OFF by turning adjustment knob fully clockwise until it stops. Do not Force.
2. When torch is cool, disconnect cylinder and store torch and cylinder separately and out of the reach of children.
Observe cautions on cylinder label.
3. Do not expose cylinders to temperatures in excess of
120°F/49°C
.
4. Store cylinders in well ventilated areas.
