BERNSTEIN G30014A, Руководство по сборке

Страница: 14 / 16

6
SUPPORT FRAME G30014A
Carefully position the basin onto the fixing bolts, lining up
the waste connections at the same time.
Under the basin, place the plastic and metal washers onto
the bolts and secure with the nuts.
Connect the hot and cold flexible pipes to the inlet elbows,
adaptors may be required.
Secure the outlet pipe onto the trap and slide the cover up
to the wall.
Fully tighten all connections.
Remove the blanking plugs from the outlets.
Finish the installation by water testing the inlet and outlet
connections in the void.
Note: You must ensure there is access to the connections
in the void. The installation is now completed by fitting the
access lid to the void.