8
5A. VARIANTE A/VARIANTE B: WALL AND FLOOR STEEL SECTION ASSEMBLY
1. Secure the stainless steel wall steel section with screws, by fixing them into it. When screwing them
in the steel section, please make sure that the screws are well fastened, in order not to damage the
glass.
2. These instructions are also valid for a floor steel section installation
3. If you use a support bar, the wall and floor steel sections should be installed 760
—
1400 mm away
from the wall.
4. The point number 3 is particularly important if you own the variant B including a second shower
screen 700 mm width. In this case, both shower walls won´t be at the same level, see figure B under
section 3. If you do not use a support bar, then you can choose the distance from the wall.
5. If you have subfloor heating and do not wish to drill holes in the floor, the steel section can also be
fixed with high performance hybrid glue.
760
−14
00mm
*
760
−14
00mm
*
760
−14
00mm
*
E1
E1
E2
E3
*bei Montage mit der Stabilisationsstange
4x30
