Remember if you need help contact Customer Care: 1+ (619) 449-2392
|7
Figure 3b
Assembly Of Battery Compartment Housing & Cover:
1. Place Battery Cover on Battery Compartment Housing. Turn over assembled Battery unit and
place on a flat, level surface. Using a Phillips screwdriver (not included) first, tighten left screw
down firmly.
2. After tightening the left screw, you will notice a small gap between the Battery Cover and the
Battery Compartment Housing.
3. Using a Phillips screwdriver (not included) tighten the right screw down firmly.
4. After both screws have been tightened, you may notice a small gap between the Battery Cover
and the Battery Compartment Housing.
5. Press down firmly on the bottom of the Battery Compartment Housing to help tighten the gap.
6. Using a Phillips screwdriver re-tighten the screws (left screw first, right screw second) to
further tighten the gap between the Battery Cover and the Battery Compartment Housing.
1. Take the Battery Compartment
and Water Pump, connect one
side of the Water Tube to the
Water Pump and the other end
to the bottom side of the Battery
Compartment (A & B of Figure
3a).
2. Lower the Battery
Compartment and Water Pump
into the Torri Topper. Battery
Compartment and Water Pump
should be flush with Torri Topper
(Figure 3b).
Figure 3a
Assembly Of Water Pump & Tube To Battery Compartment:
Содержание 6-in-1 Torri Fountain
Страница 1: ...6 I n 1 T orri F ountain Owner s Manual...
