Bernina BERNINA 560, Инструкция по эксплуатации

Страница: 68 / 192

67
Practical stitches
1
2
Zipper foot no. 4
Straight stitch no. 1
preparation
⦁ close seam to the zipper beginning
⦁
sew securing stitches
⦁ baste seam closed and clean
⦁ finish the seam allowance
⦁ iron the seam
⦁
open the zipper
⦁ baste the zipper: baste or pin zipper in place so that fabric folded edges
meet over the center of the zipper
Sewing in the zipper
⦁ open zipper a little
⦁ move needle position to the right
⦁ start sewing from top left
⦁ position the foot so the needle stitches along the edge of the zipper coils
⦁
stop in front of the pull (needle position down)
⦁ raise the presser foot
⦁ close the zipper again
⦁ lower the presser foot
⦁
continue to sew, stop in front of the base of the zipper, needle position
down
⦁ raise the presser foot
⦁ turn the sewing project
⦁
lower the presser foot
⦁ sew across the seam, stop with needle position down
⦁ raise the presser foot
⦁ turn sewing project again
⦁
lower the presser foot
⦁ sew the second side from bottom to top
Variation: Sew both sides of zipper from bottom to top
Suitable for all fabrics with nap or grain (e.g. velvet).
⦁ prepare zipper as described above
⦁ start sewing in the seam of the zipper end and sew first side from bottom to
top
⦁
sew diagonal along the edge of the zipper coils
⦁ first side 1 sew from bottom to top
⦁ move needle position to the left
⦁ second side 2 sew in the same way from bottom to top
Sew around the zipper pull
̶ sew up to about 5cm away from the zipper pull
̶ stop with the needle down, raise the presser foot, open the
zipper, lower the presser foot, finsih sewing (use Free Hand
System)
Seam begin
̶ hold thread firmly when starting to sew = pull fabric slightly to the
back (fewer stitches) or
̶ sew about 1-2cm reverse first, and continue to sew as usual
Zipper or fabric is thick or densely woven
For even stitch formation use a 90-100 needle.
Zipper
034790.50.04 _2013-03_Manual_B560_EN