Mastering
Your
BERNINA
®
BERNINA
®
/
bernette
®
Sewing Machines
M
ASTERING
Y
OUR
BERNINA
®
/
bernette
®
S
EWING
M
ACHINE
8/05
121
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Notes:
Owner’s manual: _____
Applique - continued
bernette
®
Attach zigzag/universal foot
to the machine. Select straight
stitch. Stitch along the drawn
line, around the entire circle.
Overlap ends ½”.
Remove fabric from machine.
Using sharp scissors, carefully
trim away the topmost layer of
fabric from within the circle.
Select a satin stitch (zigzag
stitch with a stitch length of
approximately 0.3mm). Adjust
the stitch width to 3mm. Attach
satin stitch foot to machine.
Stitch around circle, covering
the previous stitching and the
raw edge of the cut fabric.
Overlap slightly at end; pull
thread tails to back and knot.
Select square stitch (or other
decorative stitch). Sew around
the circle one more, slightly
outside the previous stitching.
Circular Reverse Applique
BERNINA
®
Attach Circular Embroidery
Attachment #83 to the machine
arm. Remove rubber cap from
pin. Place layered fabric (stabilizer
down) over attachment, aligning
mark over pin. Push fabric down
over pin, taking care not to pierce
fingers. Replace cap on pin.
Check size of circle by turning
fabric around pin. Adjust setting
as needed so edge of circle is
within fabric square.
Attach Clear Foot #34/34C to
machine. Select straight stitch.
Sew, letting the fabric turn around
the pin as it feeds under the foot.
Overlap ends ½”.
Carefully remove fabric from
attachment without moving pin.
Using sharp scissors, trim away
topmost fabric layer from within
circle. Replace fabric on pin,
making sure pin pierces through
the same point in center of circle.
Select satin stitch (zigzag with
SL of approximately 0.3mm).
Adjust SW to 3mm. Attach Open
Embroidery Foot #20/20C. Stitch
around circle, covering previous
stitching and raw edge of fabric.
Overlap stitching slightly at end;
pull thread tails to back and knot.
Move point of attachment one
notch away from needle. Select
heart stitch (or other decorative
stitch). Sew around circle once
more; hearts form just outside
satin-stitched circle.
Remove attachment.