12
HOW TO REMOVE AND INSERT
NEEDLES
Needle Position
–
With this machines, three needles can be
inserted to the Needle holder as shown.
–
The Stitch overview refers to different needle
positions by illustrating the Needle holder.
C
D
E
D
D
C
E
E
D
C
C
D
E
1
2
3
C
D
E
D
D
C
E
E
D
C
C
D
E
1
2
3
PLEASE NOTE:
When all coverstitch needles are inserted, the
left needle will be slightly higher than the others.
To Remove Needle(s)
–
Turn the hand wheel counterclockwise until the
needles are at their highest position.
–
Hold the needle to be removed with the needle
holder (stored in the looper cover).
–
Loosen the setscrew and remove the needle.
(C)
Left Coverstitch Needle (LC)
(D)
Center Coverstitch Needle (CC)
(E)
Right Coverstitch Needle (RC)
CAUTION:
After removing the specific needle which is not
currently to be used for sewing, remember to
fasten the set screw in the screw hole of the
Needle holder and to just fasten tight into the
hole.
Please do not over–tighten the screw into the
hole or the Needle holder will be damaged.
CAUTION:
Be sure to disconnect the machine from the
electric outlet before removing needle(s).
