Bernette b70 DECO Скачать руководство пользователя страница 77

Страница: 77 / 102

Errors and Faults

2022-08 EN 5020070.40A.04

Errors and Faults

9.1 Troubleshooting

Fault

Cause

Repair

Uneven Stitch Formation

Upper thread too tight or too
loose.

> Adjust the upper thread tension.

Needle blunt or bent.

> Replace the needle, make sure that a new BERNINA

quality needle is used.

Poor quality needle.

> Use a new BERNINA quality needle.

Poor quality thread.

> Use quality thread.

Incorrect needle/thread
combination.

> Match the needle with the thread size.

Incorrectly threaded.

> Rethread.

Dust or thread remnants under
the tension spring of the bobbin
case.

> Remove any dust or thread remnants from under the

tension spring of the bobbin case.

Skipped Stitches

Incorrect needle.

> Use the needle system 130/705H.

Needle blunt or bent.

> Replace the needle.

Poor quality needle.

> Use a new BERNINA quality needle.

The needle is incorrectly inserted.

> Insert the needle with the flat side to the back as far up

as it will go into the needle holder and tighten the
screw.

Incorrect needle point.

> Match the needle point to the texture of the material.

Upper Thread Breaks

Incorrect needle/thread
combination.

> Match the needle with the thread size.

Upper thread is too tight.

> Reduce the upper thread tension.

Incorrectly threaded.

> Rethread.

Poor quality thread.

> Use quality thread.

The stitch plate or the hook tip is
damaged.

> Contact a specialized bernette dealer to have the

damages repaired.

> Replace the stitch plate.

Содержание b70 DECO







































































































Результаты поиска

Содержание b70 DECO

Отзывы:

Бренды по названию

Популярные бренды

Bernette b70 DECO, Руководство пользователя

Результаты поиска

Содержание b70 DECO

Отзывы:

Бренды по названию

Популярные бренды