56
Programming the Pattern Combination
Example: Stitch pattern 56, 58 and 57 (mode 3)
Select pattern 56 (mode 3).
Press the memory button, and the stitch pattern 56 is
memorized.
The LCD display shows only 1 character at a time. The
memorized stitch pattern is shifted to the left side of the
display and the cursor blinks.
Select pattern 58 (mode 3). Press the memory button.
Select pattern 57 (mode 3). Press the memory button.
A pattern combination series will be sewn. If you press the
auto-lock button while the machine is sewing, the
machine will sew the current pattern and locking stitch, then
stop automatically.
Programming Auto-thread Cutting
Example: Auto-thread Cutting with Patterns 56, 58 and 57 (mode
3)
Refer to procedure to on “Programming the Pattern
Combination” above to enter the stitch patterns 56, 58 and
57.
Press and hold the thread cutter button until the thread
cutter mark appears on the LCD display.
Start to sew. A pattern combination series will be sewn and
the machine will trim the threads automatically after locking
stitch.
PLEASE NOTE:
Stitch patterns can be memorized up to 50 patterns.
