Berner JM-4004, Инструкция по эксплуатации

Страница: 13 / 41

10-TONN HYDRAULIC BODY/FRAME REPAIR EQUIPMENT
FOR YOUR SAFETY
6. Never lift a load that exceeds the capacity oft the ram. Do not overextend the ram
because it is possible to force the plunger out of the top of the ram. (G1, G2)
7. When coupler valves are disconnected, screw in dust cap to keep the oil line clean (G3)
8. Do not drop heavy objects on your hose and avoid sharp kinks. Provide proper clearance to
avoid damage to the hose and the couplers. (G4)
9. Always keep your equipment away from excessive heat or fire. Heat always weakens the
equipment. (G5)
10. Be careful when load is not centered on ram plunger. Pump carefully – IF YOU FEEL THAT
YOU HAVE PUMPED UNUSUALLY HARD – STOP OPERATION. Adjusting set-up to the
off center load is not so great.
HOW TO OPERATE SAFELY
IMPORTANT :
During transportation or handling, air may get tratted in hydraulic system. To release air, the
following steps should be performed. (1) Hold the pump. To let air vent valve in upward position.
(2) Open air vent valve. (3) Open oil release valve. (4) Pump several times. (5) Close air vent
valve. (6) Close air release valve.