Bernee
®
11
/
13
Set baud rate as 9600 and code value as 0010: we only need dial ID7 as ON and others are off
Notes: factory codes are 1; protocols are PELCO-D; baud rates are 2400
6. Basic control for dome
6.1 Power connection self-test
After power connection, camera firstly begins auto horizontal rotation and vertical rotation, then
zoom-in and zoom-out. This course verifies dome works normally.
Control camera rotation (up/down/left/right)
After selecting a camera, you can manually control dome rotation (up/down/left/right). Joystick action
leads camera action, i.e. joystick directs right, camera directs right also; other direction
(left/down/up/diagonal) actions are in the same method.
After selecting a camera, we can manually control dome rotation (up/down/left/right)
6.2 Preset setting
Set preset according to below:
-
Selecting camera (details in keyboard instruction)
-
Managing joystick, zoom key, focusing key and aperture key adjust picture of camera
-
Digit key+ SET (input specified preset number)
6.3 Call preset
Call preset according to below:
-
Selecting camera
-
Press digit key+ CALL (input specified preset number), camera will promptly shift to preset
position with auto changing of zoom, focusing and aperture
-
If inputting special preset (details in preset chart), dome will start operation related to
fixed-function camera (e.g. input #82 preset and camera will start auto tour).
Preset chart:
Preset
Number
Function
55~63
#55~#63 presets circular scanning
82
Auto tour (#0~#54 presets orderly
switch)
83
Auto adjust aperture
89
Delete all presets
91
Auto adjust focal length
94
Restart
96
180° zone scanning
97
360° zone scanning
98
90° zone scanning
