1.Remove all packaging material.
2.Clean the kettle by filling with clean water and bringing to the boil (see ”Operation”).
Pour away the water then repeat the operation.
1.Wind out the mains cord only as much as necessary. Draw it out through the opening
in the base and connect it to a suitable mains socket. Place the base on a flat surface.
2.Open the lid by pressing the lid release button and pour in the desired quantity of water.
While doing so, watch the water level mark inside the appliance. Never go below the
minimum (MIN) or above the maximum (MAX) marks.
3.Close the lid by pressing the cover down and ensure that the kettle is switched off
before setting it on the base.Remember to cover the lid tightly,otherwise it will not cut
off the electricity automatically even after the water has boiled.
4.Press the switch down to the position ”I”. The appliance will begin to operate, and the
indicator light will come on.
5.When the water boils, the appliance will switch off automatically and the indicator light
will go off.
6.You can pour the water out without opening the lid.
7.If you wish to stop the boiling process or interrupt it temporarily, switch the appliance
off by pushing the switch upwards to the position ”O”, before removing the kettle from
its base.
BEFORE FIRST USE
OPERATION
This appliance comes with a safety device which automatically switches off the heater
element if the applicance is inadvertently switched when empty, or if it boils dry. In this
case, let the applicance cool down completely, before filling with water again.
Please also observe the safety advice for this.
1.Always remove the plug from the mains socket before cleaning the base. Let the kettle
cool down completely.
2.Clean the outside of the kettle and the base with a soft damp cloth. Do not use
scouring materials.
3.Descale at regular intervals. Use a descaling agent, which can be obtained from
specialist shops, and follow the instructions given.
4.Don’t use any metal object or hard object to clean the heater otherwise it will be
scraped.
Operating voltage : 220-240V~ 50/60Hz
Power consumption : 1850-2200 W
You can help protect the environment!
Please remember to respect the local regulations:
hand in the non-working electrical equipments to
an appropriate waste disposal centre
NOTE:
CLEANING AND CARE
TECHNICAL DATA
ENVIRONMENT FRIENDLY DISPOSAL
Glass Kettle im.indd 3
2017.08.28. 10:25:20
