Fit the Back into place by
placing the poly tabs at the
ends of the back supports into
the cutouts in the back leg of
the side assembly. Fasten
using 1 - 1" Buglehead Screw
for each poly tab.
Attach the second side
assembly by repeating
Steps 2 - 4.
Lift the top of the chair
and set the swivel stem
into the receiver of the
base. Push firmly onto the
chair until it sits securely
in the receiver.
Position the Aluminum Seat Frame on the
underside of the chair seat as shown at the
right. Drive 2 - 1/4"x 1 3/4" Lags through the
holes in the seat frame and into the predrilled
holes in the seat. Fasten it only on the side of
the chair seat that you attached in step 2.
Note:
Please use the instruction from step 1 to ensure
the front of the frame is towards the front of the chair!
Step 3
Step 4
Step 5
Step 6
Step 4 Detail
1" Buglehead Screw
1" Buglehead Screws
Step 3 Detail
1/4" x 1 3/4" Lags
