Step 6 Detail
Step 5 Detail
Step 4 Detail
Step 4
Attach the four Glider Stops to the Base
using four - 1/4" x 3 1/4" Bolts and four -
1/4" Flangenuts.
Insert the bolts through the Glider Stops
and into the predrilled holes in the base.
Be sure to firmly fasten.
1/4" x 3 1/4" Bolts
Glider Stops
1/4" Flangenuts
Step 5
Install the Glider Brackets
using following sequence.
First slide the Glider Bracket
onto the 5/16" x 3" Bolt.
Secondly slide the round
5/16" Aluminum Spacer onto
the bolt, positioning it beside
the glider bracket. Insert the
bolt into the predrilled holes
in the glider base.
Firmly tighten with the 5/16"
Lock Nut and place a 5/16"
Cap Nut at the end of the
bolt sequence.
Repeat this step for all four
glider brackets.
5/16" x 3" Bolt
Aluminum Spacer
5/16" Lock Nut
5/16" Cap Nut
Glider Bracket
Step 6
Slide the Glider Base
Assembly underneath the
Glider Chair ensuring
that the footrest is
forward. Lift chair until
you can slide the Glider
Brackets onto the
5/16" x 2 1/2" Bolts
that are installed in the
lower part of the legs.
Using four - 5/16" Locknuts,
secure the brackets onto
the bolts and against the
flangenuts that were already
installed. Repeat this process
for each of the four
glider brackets.
5/16" Flangenut
Glider Bracket
5/16" Locknut
5/16" x 2 1/2" Bolt