Step 2
For Dining Height Chairs Only
Fit the leg braces into the cutouts in
the lower parts of the chair legs as shown.
Fasten them by using the #2 square drive bit
and driving 4 - 2" pandeck screws into the
predrilled pocketholes.
Step 2
For Counter, Bar & XT Height Chairs Only
Place the Footrest Assembly between
the chair legs. Align the predrilled
holes of the footrest with the predrilled
holes in the chair legs.
Using the 5/32 Allen Drive Bit, fasten
it using 8 - 1/4" x 2" Lags
.
You may need to reverse your drill
several times before you are able to
drive the lags in completely.
1/4
" x 2" Lag
s
Leg Brace Attachment Detail
Footrest Attachment Detail
2" Pandeck Screws
