Bristol Dining Chairs
Assembly Guide
Tools Required
Hardware Included
Cordless Drill
#2 Square Drive Bit
5/32" Allen Drive Bit
(Included with Counter, Bar & XT Ht. Only)
Step 1
Fasten the back to the seat by fitting the
seat supports into the cutouts in the back legs.
Using the #2 square drive bit, drive
4 - 4" buglehead screws into the predrilled
holes in the back legs. You may need to reverse
your drill several times before being able
to pull the pieces tightly together.
Note: Ensure that the outside surfaces of the back leg
and seat support are even and are securily fastened
as noted below!
4 - 4" Buglehead Screws
4 - 2" Pandeck Screws
(Dining Ht. Only)
8 - 1/4" x 2" Lags
(Counter, Bar & XT Ht. Only)
Dining
Counter
Bar
XT
Back & Seat Assembly Detail
4" Buglehead Screws
Ensure that the outside surfaces of both pieces are even and are securely fastened!
