First the old light scene is called up; do not release the button during this. After about
3 seconds the new light scene is saved and activated.
i
If during saving of a light scene the blind is not in an end position, or is on the way there,
then that blind is not integrated into the light scene.
Call up All Off
In the teaching procedure for a channel button or a light scene button, the All Off button of the
receiver is automatically also taught, with the exception of radio blind actuators.
Function switch 1 is in the
OFF
position (see Commissioning).
o
Press button
1-
longer than 1 second.
The loads at all taught receivers are switched off.
5 Information for electrically skilled persons
5.1 Fitting and electrical connection
Connecting and mounting the device
Maintain a distance of at least 1 m between transmitter and receiver.
Maintain distance from large-area metal objects, e.g. metallic door frames.
i
Perform commissioning and teaching procedures before installation (see Commissioning
chapter).
o
Using a screwdriver, carefully remove cover (6) and labelling field (5) from wall transmitter.
o
Slacken fastening screw (4).
o
Remove wall transmitter (3) from the base plate (1).
o
Inset battery if necessary (see section Changing the battery).
o
If necessary, set functions using function switch (see Commissioning chapter).
o
Glue or screw base plate to even surface; the
TOP/OBEN
label has to be at the top.
o
Screw wall transmitter onto base plate.
o
Carefully attach inscription panel cover and inscription panel.
Changing the battery
WARNING!
Risk of chemical burns.
Batteries can burst and leak.
Replace batteries only with an identical or equivalent type.
o
Unscrew wall transmitter from the base plate and remove it (see section Connecting and
mounting the device).
Seite 4/7
13.08.2010
82532711
97-09322-000
radio bus
Radio wall transmitter flat - 1gang, 2gang, 4gang
